Double Load – T-350
Washer Operating Instructions
Starting the Washer
Step 1: Load Your Clothes
Open the washer door and load clothes loosely into the cylinder.
Ensure no clothing is caught between the door gasket and the tub front before closing the door.
To securely latch the door:
- Move the handle to the horizontal position, then to the vertical position.
Step 2: Add Detergent
Use low-sudsing powdered or liquid detergent. Pour it into the detergent dispenser located on top of the machine. Follow the labeled compartments for detergents or rinse conditioners.
If using Tide Pods (or similar), place them directly into the cylinder with your clothes—not in the detergent dispenser.
Step 3: Select Temperature
Use the temperature select buttons on the front panel to choose the desired temperature for your wash cycle.
Step 4: Start the Washer
Activate the washer using your Laundroworks card or the DexterPay app:
- For Laundroworks, tap your card on the card reader.
- For DexterPay, select the machine on the app, pay, and start the cycle.
For more details, visit our Payment Options page.
Step 5: Add Bleach (Optional)
During the wash cycle, the green “add bleach” light will illuminate for approximately 2.5 minutes, indicating the correct time to add bleach. Refer to the diagram on the machine for the bleach compartment.
Step 6: End of Cycle
When the cycle is complete:
- The end-of-cycle buzzer will sound.
- The “on” light will turn off.
- Turn the door handle to the open position and pull to retrieve your clothes.
- Leave the door open when not in use to ensure the washer dries properly.
The display will reset, showing the amount required to start the next cycle.
Additional Information
- Not sure which washer size is best for your load? Check out our
FAQ page for guidance. - Need help? Visit our Contact Us page or speak with a team member on-site.